Lines of Code
[root]/CCA/Components/Examples
| Author | Changes | Lines of Code | Lines per Change |
|---|---|---|---|
| Totals | 176 (100.0%) | 1038 (100.0%) | 5.8 |
| jas | 48 (27.3%) | 399 (38.4%) | 8.3 |
| mcconnell | 4 (2.3%) | 361 (34.8%) | 90.2 |
| allen | 49 (27.8%) | 177 (17.1%) | 3.6 |
| harman | 71 (40.3%) | 55 (5.3%) | 0.7 |
| jholmen | 1 (0.6%) | 39 (3.8%) | 39.0 |
| dav | 1 (0.6%) | 7 (0.7%) | 7.0 |
| ahumphrey | 2 (1.1%) | 0 (0.0%) | 0.0 |
refactored the task graph index setting to be task based, added set/get for the index, Within arches refactor the dynamic stepping to be completing with DoRadiation and the fixed stepping in Explicit Solver, and added a check method for reduction vars
24 lines of code changed in 4 files:
Changed interface to match AppCom
1 lines of code changed in 1 file:
Update computeTaskGraphIndex()
6 lines of code changed in 2 files:
Replaced tabs with spaces.
Please check your editors.
31 lines of code changed in 56 files:
removal of shared state and introduction of a material manager
147 lines of code changed in 39 files:
Removed SolverParameters tangled web from the components/applications. The each solver "owns" the parameters
and the component/application set the parameters via the solver, solver->getParameters()->SetSomething()
- Added virtual function getParameters()
- Removed tabs and other formatting.
- Rename HypreSolver2Params -> HypreParams
- Moved CG and Direct constructors/destructors code so there is consistency in code layout between the different solvers.
8 lines of code changed in 4 files:
This commit brings the PIDX data I/O branch (named: pidx_xml) back into the trunk.
All PIDX data I/O is, by default, turned off. To use PIDX you have to configure
against the PIDX library (either installing manually and pointing at it, or using
the --with-pidx flag (not 100% certain that this works at the moment)), and you must
set <DataArchiver type="PIDX"> (as opposed to the default which is type="UDA") in
the .ups input file.
Other caveats:
- Particles are not (currently?) supported in PIDX so any simulation that has a
particle data type will fail (most will print an error that PIDX does not
support them, but it seems some just die).
- Simulations that have overlapping patches (this may just be AMR type
sims) (eg: multibox_rmcrt_coal_1L) can save (slightly different) results.
In the multibox_rmcrt_coal_1L, we saw (only) a handful of differences like this:
((A 1 vs a 0 in a couple of locations) Also note that the UDA itself compared
successfully, but the checkpoint underneath it did not...)
DIFFERENCE [int 36, 5, 0] Time: 0.0003106658 Level: 0 Patch1: 0 Patch2: 0 Material: 0 Variable: areaFractionFX
multibox_RMCRT_coal_1L.uda/checkpoints goldStandard/.../multibox_RMCRT_coal_1L.uda/checkpoints
1 0
- "#if HAVE_PIDX" is used inconsistently through a number of files. Some PIDX stuff is #if'd out, while other code
is left in and compiles, it is just not used.
- There are a lot of cleanups that can and should take place wrt the PIDX integration.
While the code passes all the local RT tests (with the exception of particle tests),
I don't believe it has been run at large scale (though it should work) on a BGQ or Quartz@llnl.
Summary of changes: (Note, see pidx_xml branch commits if you want more information.)
M CCA/Ports/ApplicationInterface.h
M CCA/Components/Application/ApplicationCommon.h
- Added the ability to record (and retrieve) the number for the last regrid time step.
M CCA/Components/DataArchiver/DataArchiver.h
M CCA/Components/DataArchiver/DataArchiver.cc
- When saving as PIDX, only create/output timestep.xml on the initial (I/O) time step that occurs after the regrid.
- Fixes that allow PIDX to save correctly (and efficiently) in parallel. If you are ever trying
to trace this back, read the comments from the commit logs for the "pidx_xml" branch.
- Remove createPIDX_dirs() as it was commented out and Sid tells me that PIDX creats its own dirs and we don't need this.
- Lot of white space fixes.
M CCA/Components/Examples/RMCRT_Test.cc
M CCA/Components/PostProcessUda/PostProcess.cc
- The DataArchive (DA) queryVariables() function now also returns the number of materials for each variable.
- "else" and "else if" should be on a separate line to make it easier to read.
M CCA/Components/Models/Radiation/RMCRT/RayGPU.cc
- Differentiate the output between the GPU and non-GPU reports so the viewer knows explicitly whether the GPU code was run.
M CCA/Components/Schedulers/OnDemandDataWarehouse.h
M CCA/Components/Schedulers/OnDemandDataWarehouse.cc
- Cosmetics: Line up variables, use more than 80 chars per line, white space.
Add in comments denoting default param values.
M CCA/Components/Schedulers/SchedulerCommon.cc
- Cosmetics.
M CCA/Components/SimulationController/AMRSimulationController.cc
- Cosmetics: Use more white space, 80+ chars per line for better readability, etc.
M CCA/Ports/PIDXOutputContext.h
- const'ify some params.
- checkReturnCode() is a static function so mark it so.
M CCA/Ports/PIDXOutputContext.cc
- White spacee. Code alignment for readability.
M Core/DataArchive/DataArchive.h
M Core/DataArchive/DataArchive.cc
- Add in PIDX functions. Note, queryPIDXSerial() is used (currently) by standalone codes (eg: puda).
Its purpose is to wrap the setupQueryPIDX()/queryPIDX() calls that have been added to
allow PIDX to truly run in parallel. At some point it would be good to update puda/compare_uda/etc
to run in parallel...
- See previous comments from PIDX branch for more details on the PIDX communicators that are necessary
to transfer data as some data does not live on all cores and thus can't use the golbal comm.
- Rename a few functions (queryAndSetParticlePositionName()) to be more accurate as to what they do.
- There are still a number of hacks in this code that need to be addressed (eg: var_materials map).
M Core/Geometry/IntVector.h
- Mostly cosmetics...
White space for readability.
Place 1-line functions in .h on one line to make it easier to see all provided functions.
M Core/Grid/Grid.cc
- White space, variable alignment for readability.
M Core/Grid/Level.h
M Core/Grid/Level.cc
- White space, coding standard (return type on its own line).
- Fix logic error in computeVariableExtents() that did not handle periodic boundaries correctly.
This fix was suggested as probably the correct way to do it by Todd... seems to pass tests and did fix
the issue (PIDX saving a particular something or other) that led me to it.
M Core/Grid/Patch.cc
- Place "else" on its own line for readability.
M Core/Grid/Variables/GridVariable.h
- Added emitPIDX().
- Opening "{" for functions in .h files goes on same line.
M Core/Grid/Variables/GridVariableBase.h
M Core/Grid/Variables/GridVariableBase.cc
- Organize #includes.
- White space, line up vars, etc for better readability.
- Return type on its own line.
M Core/Grid/Variables/ParticleData.h
- #include ParticleSubset.h for particleIndex.
M Core/Grid/Variables/ParticleSubset.h
- Cosmetic white space.
M Core/Grid/Variables/ParticleVariable.h
- White space, variable line up, etc.
- Added emitPIDX() function for particles. Note, particles do not fully work yet (on PIDX side).
And thus, this function hasn't really been tested.
M Core/Grid/Variables/ParticleVariableBase.h
M Core/Grid/Variables/ParticleVariableBase.cc
M Core/Grid/Variables/PerPatchBase.h
M Core/Grid/Variables/PerPatchBase.cc
M Core/Grid/Variables/ReductionVariableBase.h
M Core/Grid/Variables/ReductionVariableBase.cc
- Cosmetic white space. Coding standards. Etc.
M Core/Grid/Variables/Variable.h
M Core/Grid/Variables/Variable.cc
- Organize #includes.
- Use "const" on params that are const.
- Cosmetic white space, etc.
M Core/Grid/Variables/VarnameMatlPatch.h
- Pass non-changing strings by const reference (instead of copying them).
- White space for readability.
M Core/ProblemSpec/ProblemSpec.cc
- Line up vars, white space.
M R_Tester/helpers/compare_dat_files.pl
- Strip "/" from end of uda names.
- Clean up output to make it more readable (Todd I hope this doesn't break some of your scripts...)
M R_Tester/helpers/compare_dats
- White space.
M R_Tester/helpers/runSusTests.py
- Fix typo.
M StandAlone/compare_uda.cc
- White space.
- Line up vars.
- Coding standard.
- Line up case statement for better readability.
- 0 => nullptr
- query() now returns if the var was found (because PIDX has a list of all variables the simulation starts with
and the vars may not actually exist in the UDA.
- var => var_name (as it is actually the name, and not the var).
- Use 80+ columns.
M StandAlone/partvarRange.cco
M StandAlone/selectpart.cc
M StandAlone/tools/compute_Lnorm_udas.cc
M StandAlone/tools/dumpfields/dumpfields.cc
M StandAlone/tools/extractors/extractF.cc
M StandAlone/tools/extractors/extractS.cc
M StandAlone/tools/extractors/extractV.cc
M StandAlone/tools/extractors/faceextract.cc
M StandAlone/tools/extractors/lineextract.cc
M StandAlone/tools/extractors/partextract.cc
M StandAlone/tools/extractors/particle2tiff.cc
M StandAlone/tools/extractors/timeextract.cc
M StandAlone/tools/puda/AA_MMS.cc
M StandAlone/tools/puda/ER_MMS.cc
M StandAlone/tools/puda/GV_MMS.cc
M StandAlone/tools/puda/ICE_momentum.cc
M StandAlone/tools/puda/PIC.cc
M StandAlone/tools/puda/POL.cc
M StandAlone/tools/puda/asci.cc
M StandAlone/tools/puda/jacquie.cc
M StandAlone/tools/puda/jim1.cc
M StandAlone/tools/puda/jim2.cc
M StandAlone/tools/puda/jim3.cc
M StandAlone/tools/puda/pressure.cc
M StandAlone/tools/puda/puda.cc
M VisIt/interfaces/archiveInterface.cc
- queryVariables() now returns number of materials.
M StandAlone/tools/puda/varsummary.h
M StandAlone/tools/puda/varsummary.cc
- Swat some evil endls.
M build_scripts/build_pidx.sh
- FYI... Not sure if changing PIDX_TAG to "master" actually works...
M buildbot_try.sh
- Added a number of comments about use of this script.
- Fixed some typos.
- Spread command to multiple lines for readability.
7 lines of code changed in 1 file:
Added scheduleRestartInitialization() to the solver infrastructrure.
If you need a solver related variable from the old_DW and it isn't checkpointed then
create it in this task.
It's currently disabled in hypre.
4 lines of code changed in 3 files:
fix absently minded move
0 lines of code changed in 2 files:
Update copyright date.
361 lines of code changed in 2 files:
Changed variable name modfies_hypre -> isFirstSolve and made a small change in the scheduling logic.
The hyper_solver_label was never modified. The scheduling logic changed after the first pass
through the solver, thus the name change.
3 lines of code changed in 3 files:
Removed sharedState from SolverParameters::readParameters(). It's not used.
HypreSolver.h
_ removed setSolveFrequency() and getSolveFrequency. The solve frequency is handled by the parameters.
BuildBotTry:
Changed #!/bin/csh -> #!/bin/csh -f
This fixed a oddball error.
3 lines of code changed in 3 files:
removed the shared state from the radiation model and re-invoked the in-situ
1 lines of code changed in 1 file:
restructured teh Dout and DebugStream to register the streams to avoid conflicts
1 lines of code changed in 1 file:
* Removed Uintah::parallel_reduce.
* Added Uintah::parallel_reduce_min.
* Added Uintah::parallel_reduce_sum.
* Replaced use of Uintah::parallel_reduce with Uintah::parallel_reduce_sum.
* Replaced use of Uintah::parallel_for within KokkosSolver::computeStableTimeStep with Uintah::parallel_reduce_min.
* Cleaned up whitespace and formatting.
This commit extends Uintah's parallel patterns to support minimum reductions on scalar data.
39 lines of code changed in 1 file:
moved PerPatchVars.h to Core and RunTimeStatsEnums.h to Schedulers to give better separation, Also removed unneeded ehader files
3 lines of code changed in 3 files:
Remove old, unused Example Component. Update UPS spec accordingly.
0 lines of code changed in 2 files:
Update copyright date.
399 lines of code changed in 48 files: